Scan
Add WeChat
|
Descriptions
Plugging of conductive and non-conductive resin inks using the vacuum principle，Suitable for many types of whole board hole plugging processes and can be applied to materials such as resins, silver paste, copper paste and conductive adhesives.
Features
★Flexibility to realise: through holes, blind holes on one or both sides, back drilled holes, etc. on the same board surface.
★For high density BGA on circuit boards.
★Ideal for small quantities and a wide range of gauges, no fixtures or air guides are required for hole plugging.
★The operating interface is automated, user-friendly and easy to operate.
Product Specifications
Machine Size | 2862*844*2559mm |
Vacuum | -0.99bar/-99kpa（at standard atmospheric pressure） |
Panel Thickness | 0.2-8.0mm |
Panel size | MAX:26inch*34inch(660*863mm) MIN:10inch*10inch(250*250mm） |
Aspect Ratio | Through hole: 40:1 (Max.) Blind hole: 1:1 (Max.) |
Plugging Methods | Full Plate Plug Holes（from top to bottom） |
Plugging Speed | 2-80mm/sec(adjustable） |
Plugging Pressure | 0-6bar(adjustable） |
Diameter of plugging holes | Through hole: 0.1-1.0mm (hole diameter after plating) Blind hole: 0.1-1.0mm (hole diameter after plating) |
Sound (normal operation) | ≦75dB |
Paste Pressure | Cylinder push force: 0-6bar (adjustable) Pneumatic push force: 0-6bar (normal use doesn't exceed 3bar) |
Plug holes and plate edge spacing | Hole from board edge≧15mm |
Operation Panel | Touch-screen operation |
Protection devices | Safety grids, emergency stops |
Paste Addition Methods | Single paste Clip Replacement |
Failure rate | ≦1/400h(Failure time/equipment uptime) |
Height of operating table | 1000±100mm |
Scraper speed | 5-200mm/sec(adjustable） |
Scraper pressure | 0-6bar(adjustable） |
Production Capacity
Capacity is affected by aspect ratio (Panel thickness, aperture diameter), Paste Viscosity. | Capacity | Aspect ratio | No. of plugging hole cutters |
Capacity per hour | 20-70 | Max：40:1 | 1-6 |
Communal Requirement
Electrical requirements | |
Electric | Three-phase five-wire 380V |
Pressure of compressed air | ≧6.5bar |
Power (output) | 9.2KW |
Vacuum Pump Discharge Volume | 20m3/h(interfaces:φ80mm） |
Compressed air consumption | 0.08m3/h(interfaces:φ10mm） |
Recommended space around the machine | 800mm |
Weight | 1515kg |
Equipment installation environment (temperature, humidity and dust-free requirements) | A. Environmental requirements: clean room B. Temperature requirement: 22±2℃. C. Humidity requirements: 50±5% |
